Procoat Etch Primer
A chemically etching primer designed for steel, aluminium, galvanised iron and most other metals.
Procoat Etch Primer is a chemically etching primer containing anti-corrosive pigments designed as a combined pre-treatment system primer for most metal substrates.
Available at Aalto Stores and Stockists
A chemically etching primer designed for steel, aluminium, galvanised iron and most other metals.
Procoat Etch Primer is a chemically etching primer containing anti-corrosive pigments designed as a combined pre-treatment system primer for most metal substrates.
Available at Aalto Stores and Stockists
A chemically etching primer designed for steel, aluminium, galvanised iron and most other metals.
Procoat Etch Primer is a chemically etching primer containing anti-corrosive pigments designed as a combined pre-treatment system primer for most metal substrates.
Available at Aalto Stores and Stockists
Product Specification Solvent based
Coverage 10-12m2 per litre per coat
-
Ensure the surfaces are free from loose and flaking paint. Wash surfaces with a suitable cleaner such as sugar soap prior to painting to remove any oil, grease, dirt or other contaminants. Where there are areas of mould, treat with a mould remover.
-
Brush
Roller
Spray -
Ferrous substrates:
Shot or sand blast to a SA 2.5. Apply Procoat Etch Primer within 5 minutes – do not blast more area than can be coated within 2 hours.Non-ferrous substrates:
Waterblast to remove all rust. Spot prime bare areas with Procoat Etch Primer, allow 2 hours to dry.Apply 2 coats of Procoat Spraying Enamel, allowing 6 hours between coats.
-
4L, 20L
-
Standard Grey.
-
N/A
-